The main measures to prevent direct lightning is to install lightning arrester.

When the construction site is located in the mountains or dore region, substation, power distribution should be installed by independent lightning rod. Built buildings under construction, when more than 20 m high shall furnish the lightning rod. Construction site within the tower crane, tic-tac-toe frame and scaffolding equipment, if the adjacent buildings, structures of the protection range of the lightning protection Settings, and within the range specified in table 1, you should install the lightning rod. If the lightning rod on the top mechanical equipment, and shall ensure that the final out of the scene, and other equipment can not set the lightning rod.

The provisions of the construction site fairy mechanical equipment need to install the lightning rod.

Lightning rod of Balic generally choose ф 16 mm round steel, length is 1 ~ 2 m, the top should be made cone tip. After Balic must be hot dip galvanized.

Mechanical equipment of lightning rod on the lightning protection downlead available metal structure of the device, but should guarantee for electrical connection. Machinery and equipment of all power, control and communications, lighting, signal lines, such as steel pipe installation should be adopted. Steel tube and the metal structure for welding machinery equipment to ensure the channel the electrical connection in the ground.

As lightning arrester manufacturer in China, Balic provides common sizes of lightning rods, we also can do according to your requests. Please contact us to get to know more information about our products and service.

Email: info@ground-rod.com

Mobile Phone: 0086-575-86263278